SP350/357 Turn-Key Chevrolet Crate Engine

Brand: Chevrolet Performance

Part Number: 12677177

bar
bar
bar

The product's part number has been changed or discontinued. Please see the details below.

Please Log in to receive
your Private and Specific
Offers INSTANTLY!
Click Here

Why?



bar



FREE Shipping!

P/N 12677177 has been superseded by P/N 19367084

SP350/357 Turn Key Chevrolet Performance Crate Engine

357 hp @ 5,500 rpm / 407 lb.-ft. @ 4,000 rpm

 

*****AVAILABLE SUMMER 2017*****

 

An affordable Small-Block performer ready to run - SP350/357 Turn-Key!

The Chevrolet Performance line of GM Street Performance engines offers great power at a great value – and the latest is the SP350/357. It leverages the strength of a strong rotating assembly secured in a brand-new block with four-bolt mains, and matches it with modern valvetrain technology to support great high-rpm capability. 

Economical iron cylinder heads deliver excellent airflow, while the latest intake manifold technology and a new hydraulic roller camshaft optimize airflow to push 357 horsepower and more than 400 lb.-ft. of torque! Better still, the engine is built with a durable rotating assembly set in a brand-new block with four-bolt mains. That’s a feature you won’t find on most rebuildable cores.

Our SP350/357 Turn Key crate motor package comes complete with the distributor, carburetor and balancer installed. The starter, fuel pump air conditioning pump, alternator, front-end accessory drive kit and more are also included, ready to bolt on.

Chevrolet Performance also offers the SP350/357 Base crate engine, P/N 12677167 as well as the SP350/357 Deluxe P/N 12677170.

 

SP350/357 Turn-Key Specs:

Part Number: 12677177
Engine Type: Chevy Small Block V-8
Displacement (cu in): 350
Bore x Stroke (in) : 4.000 x 3.480
Block: (P/N 10105123) Cast iron with 4-bolt main caps
Crankshaft (P/N 10243070): Nodular Iron
Connecting Rods (P/N 10108688): Powdered metal
Pistons (P/N 88894280): Cast aluminum
Camshaft Type (P/N 12677151): Hydraulic roller
Camshaft Lift (in): 0.473" intake / 0.473" exhaust
Camshaft Duration (@.050 in): 215° intake / 223° exhaust
Cylinder Heads: Cast iron; as cast with 64cc chambers
Valve Size (in): 1.940 intake / 1.500 exhaust
Compression Ratio: 9.0:1 nominal
Rocker Arms (P/N 12367346): Stamped steel
Rocker Arm Ratio: 1.5:1
Recommended Fuel: Premium pump
Ignition Timing: 32º Total @ 4,000 rpm
Maximum Recommended rpm: 5,600
Balanced: External
Flexplate (P/N 14088765): 12.750"
Intake Manifold (P/N 12676887): Dual Plane

This Chevrolet Performance Crate Engine includes a 24-Month or 50,000-Mile/80,000-Kilometer Limited Warranty

Installation Notes

  • Front-End Accessory Drive included but not installed for shipment
  • Comes with 12.750" externally balanced 153-tooth automatic transmission flexplate. Requires externally balanced flywheel for manual transmission.
  • Requires fuel supply line from fuel pump to carburetor
  • Designed for pre-1976 street vehicles or any off-road vehicle
  • Not intended for marine applications

Note:  Distributor with melonized steel gear MUST be used with long-blocks and Partial engines with steel camshafts, or engine damage will occur.

Chevrolet Performance Crate Engines include a 24-month or 50,000-mile (80,000 kilometer) limited warranty.

Click here for more detailed warranty information.