x

x

Low Price Guarantee

No

Chevrolet Performance CT350 IMCA '602' Crate Engine

Brand: Chevrolet Performance

Part Number: 19258602

bar
bar
bar

The product's part number has been discontinued.

 

View Instantly Exclusive Private
and Specific Offers. Click Here



bar




FREE Shipping Always!

(Orders over $99)

CT350 Crate Engine

19258602 Chevrolet Motor

Powerful, Durable and Affordable!

Chevrolet Performance’s durable CT350 is the engine budget-conscious racers can depend on for race-winning performance and low maintenance!

350 hp @ 5,000 rpm / 390 lb.-ft. @ 3,800 rpm

It is based on the 350 HO high-performance street crate engine and features a strong four-bolt-main block and iron Vortec cylinder heads. A unique dual-pattern camshaft helps deliver more than 300 lb.-ft. of torque between 2,000 and 5,500 rpm – peaking at 390 lb.-ft. at 3,800 rpm. With that much pulling power, you can hold a gear longer, keeping the engine in its sweet spot for quicker laps.

The CT350 arrives assembled with an 8-quart circle track racing oil pan, balancer, HEI distributor and an aluminum high-rise, dual-intake manifold. Add your carburetor, starter, spark plugs, wires and water pump – all available from Chevrolet Performance – and you’ll be ready for the starting line!

Also available with IMCA Stamped Seals installed which is required for certain classes of competition.

IMCA Northern Sport Mod/B-Mod and Hobby Stock CT350 Crate Engine

P/N 19258602

350 hp @ 5,400 rpm / 396 lb.-ft. @ 3,800 rpm

 


Buy this engine and get a FREE $50.00 Visa Gift Card,
now through Dec. 31 2015.

 

 

Circle Track 350 Tech Specs:


Part Number: 19258602
Engine Type: Chevy Small-Block V-8
Displacement (cu in): 350
Bore x Stroke (in): 4.000 x 3.480
Block (P/N 10105123): Cast-iron with 4-bolt main caps
Crankshaft (P/N 10243070): Nodular iron
Connecting Rods (P/N 10108688): Powdered metal steel
Pistons (P/N 94672680): Hypereutectic aluminum
Camshaft Type (P/N 24502476): Hydraulic flat tappet
Camshaft Lift (in): .435 intake / .460 exhaust
Camshaft Duration (@.050 in): 212° intake / 222° exhaust
Cylinder Heads (P/N 12558060): Vortec iron; 64cc chambers
Valve Size (in): 1.940 intake / 1.500 exhaust
Compression Ratio: 9.12:1 Nominal
Rocker Arms (P/N 10089648): Stamped steel
Rocker Arm Ratio: 1.5:1
Recommended Fuel: 92 octane
Ignition Timing: Base 10° BTDC, 32° Total
Maximum Recommended rpm: 5,500
Balanced: External

Installation Notes:

  • The 8-quart Circle Track "Factory Stock" oil pan (P/N 25534353) is 8 inches deep at the sump and will clear most GM rear-steer chassis w/ stock engine location
  • Requires addition of carburetor, starter, water pump, plug wires and exhaust system (not included)
  • Requires an externally balanced flywheel (not included)
  • Get the most out of your engine with dyno tuning from the Karl Performance professionals - call for details
  • For Circle Track Racing only – NOT intended for street use

Note: Distributor (P/N 93440806) included with CT 350 engine has a melonized steel gear (P/N 10456413) that MUST be used on engines with steel camshafts, or engine damage will occur.




Reviews