EXCLUSIVE Private Offers - Click Here!

88869604 Chevrolet Performance CT400 IMCA Sealed 604 Crate Engine

Brand: Chevrolet Performance

Part Number: 88869604

bar
bar
bar

$6,394.81

View Instantly Exclusive Private
and Specific Offers. Click Here



bar


AND

Holeshot Transmission Rebate



FREE Shipping Always!

(Orders over $99)

CT400 IMCA Sealed '604' Racing Crate Engine

The Chevrolet Performance CT400 racing crate engine is fully sealed for IMCA "A-Mod/Modified" use and now features new cylinder head assemblies with LS-style beehive valve springs that enable greater high-rpm performance and durability.

Those lightweight aluminum heads are based on the proven Fast Burn head design, with large intake runners and 2.00/1.55-inch valves. The CT400 also has a tough bottom end, with a forged steel crankshaft and strong aluminum pistons circulating in a new four-bolt main block.

The IMCA sealed '604' crate engine assembly also includes an open-plenum high-rise intake manifold, a racing-only 8-quart circle track oil pan with a dual kick-out design, a valve cover breather kit and aluminum roller rocker arms.

For Circle Track Racing only – NOT intended for street use

CT400 IMCA Sealed '604' Racing Crate Engine

404 hp @ 5,600 rpm / 406 lb.-ft. @ 4,600 rpm

Circle Track 400 (CT400) Tech Specs:
Part Number: 88869604
Engine Type: Chevy Small-Block V-8
Displacement (cu in): 350
Bore x Stroke (in): 4.000 x 3.480
Block (P/N 10105123): Cast-iron with 4-bolt main caps
Crankshaft (P/N 12556307): Forged steel
Connecting Rods (P/N 10108688): Powdered metal
Pistons (P/N 10159436): Hypereutectic aluminum
Camshaft Type (P/N 10185071): Steel hydraulic roller
Valve Lift (in): .474 intake / .510 exhaust
Camshaft Duration (@.050 in): 208° intake / 221° exhaust
Cylinder Heads (P/N 19300955): Fast Burn aluminum; 62cc chambers
Valve Size (in): 2.000 intake / 1.550 exhaust
Compression Ratio: 9.72:1 Nominal
Rocker Arms (P/N 19210724): Aluminum; roller style
Rocker Arm Ratio: 1.5:1
Recommended Fuel: Premium Pump
Ignition Timing: 36° Total @4,000 rpm
Maximum Recommended rpm: 5,800
Balanced: External

Installation Notes:

  • Requires addition of carburetor, starter, ignition, plug wires, water pump, distributor and exhaust system (not included)
  • Requires an externally balanced flywheel (not included)
  • The 8-quart Circle Track "Late-Model" (P/N 25534354) oil pan is 7 inches deep at the sump and will clear most GM rear-steer chassis with stock engine location
  • For Circle Track Racing only – NOT intended for street use

Note: Distributor NOT included (P/N 88961867 recommended) with CT400 engine. MUST use melonized steel gear (P/N 10456413) on engines with steel camshafts, or engine damage will occur.

 

Supersedes P/N 19318604

Chevrolet Performance Racing Crate Engines are excluded from limited warranty.