Chevrolet Performance LT1 6.2L Wet Sump Crate Engine

Brand: Chevrolet Performance

Part Number: 19355405

bar
bar
bar

$9,300.00

Please Log in to receive
your Private and Specific
Offers INSTANTLY!
Click Here

Why?



bar



FREE Shipping!

LT1 6.2L Wet Sump Crate Engine

LT1 - The Next Generation is Here!

Introduced on the seventh-generation (C7) Corvette Stingray, the LT1 6.2L opened the next chapter in the long, historic legacy of the LT-1 moniker – and gives your project vehicle a high-tech heart transplant with an unprecedented balance of performance and efficiency!

The Chevrolet Performance LT1 is architecturally similar to the LS family of engines, but with a unique block casting, cylinder head design, oiling system and more. It also combines advanced technologies including direct injection, Active Fuel Management (cylinder deactivation) and continuously variable valve timing to support an advanced combustion system.

With this LT1, you'll get 455 hp and 455 lb.-ft. of torque; and a wet sump oiling system. Engine Controller Kits from Chevrolet Performance allow you to back the LT1 with a 4L70-E four-speed overdrive automatic, a T56 Super Magnum six-speed manual or the revolutionary 8L90-E eight-speed automatic transmissions!

 

LT1 6.2L Wet Sump Crate Engine

455 hp @ 6,000 rpm / 455 lb.-ft. @ 4,600 rpm

 

LT1 6.2L Specs:
Part Number: 19355405 (wet sump)
Engine Type: Direct Injection spark ignition Gen V V-8
Displacement (cu in): 376 cu in 6.2L
Bore x Stroke (in): 4.065 x 3.622 (103.25 x 92mm)
Block (P/N 12619171): Cast-aluminum with 6-bolt nodular iron main bearing caps
Crankshaft: Forged Steel
Connecting Rods: Forged powdered metal
Piston: Hypereutectic aluminum
Camshaft Type (P/N 12629512): Billet steel roller
Valve Lift (in): 0.561" intake / 0.531" exhaust
Camshaft Duration (@0.050 in): 242° intake / 244° exhaust
Cylinder Heads (P/N 12620544): Aluminum, rectangular port D/I
Valve Size (in): 2.130" intake / 1.590" exhaust
Compression ratio: 11.5:1
Rocker Arms (P/N 12619829 int): Investment-cast, roller trunnion
Rocker Arms (P/N 12619829 exh): Investment-cast, roller trunnion
Rocker Arm Ratio: 1.81:1
Recommended Fuel: Premium pump
Maximum Recommended RPM: 6600
Reluctor Wheel: 58x
Balanced: Internal

 

Installation Notes:

  • Engines shipped with high-pressure direct-injection fuel pump installed
  • Assembly does not include electronics
  • Use LT1 Controller Kit, P/N 19355167 for engine operation with 8L90-E 8-speed automatic transmission or P/N 19355458 for 4L70-E 4-speed automatic AND T56 6-speed manual transmissions - Kits include electronic throttle pedal, which is required for throttle input to the ECU
  • Intended for pre-1976 street vehicles, or any off-road vehicle
  • Not intended for marine applications
  • Front-End Accessory Drive Kit: For LT1 P/N 19355405 use P/N 12678595 FEAD w/o air
    and P/N 12678596 A/C add-on kit
  • 8-bolt crankshaft flange
  • Shipped with 14" flexplate

Chevrolet Performance Crate Engines include a 24-month or 50,000-mile (80,000 kilometer) limited warranty.

Click here for more detailed warranty information.




Reviews