Low Price Guarantee

Chevrolet Performance 350/290 Base Crate Engine + Level 3 Install Kit

Brand: Chevrolet Performance

Part Number: 19355658K3

bar
bar
bar

$3,859.95


 

View Instantly Exclusive Private
and Specific Offers. Click Here



bar




FREE Shipping Always!

(Orders over $99)

19355658 350/290 Base Crate Engine + Level 3 Install Kit

A Lot of Bang for the Buck from Chevrolet plus our Level 3 Install Kit!

This Chevrolet Performance Small-Block is affordable, but it's no slouch. The 350/290 features four-bolt mains and provides a great alternative to rebuilding your tired engine. GM filled it with a nodular iron crankshaft, hydraulic flat tappet camshaft and durable cast-aluminum pistons. Those pistons along with the durable cast iron heads' 76cc chambers provide a pump-gas friendly 8.0:1 compression ratio. Rated at 290 hp @ 5,100 rpm and a solid 332 lb.-ft. of torque at 3,750 rpm, this SBC 350 is a great engine for your project. The 2-year / 50,000 mile warranty gives you peace of mind to go down the road without worry.

19355658 350/290 Base Crate Engine + Level 3 Install Kit

19355658K3 Specifications:

  • 4-bolt main with 2-piece rear main seal
  • 4-quart oil pan, oil pump, oil pump pickup and oil pump drive shaft installed
  • Nodular iron crankshaft, internally balanced
  • Powdered metal connecting rods
  • Cast aluminum pistons, 8.0:1 compression ratio
  • Hydraulic flat tappet cam (.450"/.460" Lift, 222 / 222 Duration @ .050", and 114° lobe separation)
  • Cast iron cylinder heads with 76cc chambers
    • 1.940'' Intake / 1.500'' Exhaust valves
    • 1.241'' diameter valve springs
    • 1.5:1 ratio rocker arms
    • 3/8'' pressed-in rocker studs
  • Level 3 Install Kit includes the following:
    • 1 - 19299222 – OIL FILTER ADAPTER AND GASKET KIT
    • 2 - 03951644 – OIL FILTER ADAPTER BOLTS 
    • 1 - 89028862 – OIL FILTER
    • 1 - 10207373 – THERMOSTAT
    • 1 - 10105135 – THERMOSTAT HOUSING (WATER NECK) GASKET
    • 1 - 141-682 – DISTRIBUTOR
    • 8 - 19302744 – SPARKPLUGS
    • 1 - MSD 31249 – MSD 8.5mm IGNITION WIRES
    • 1 - 10147994 – INTAKE MANIFOLD AND DISTRIBUTOR GASKET KIT
    • 1 - 06487779 – PCV
    • 1 - 06415325 – FUEL PUMP AND GASKET
    • 1 - 12560223 – FUEL PUMP GUIDEPLATE TO ENGINE GASKET
    • 1 - 12361146 – STARTER
    • 1 - 12551537 – HARMONIC BALANCER
    • 1 - 88864346 – ENGINE SEALANT
    • 1 - EDE 2701 – EDELBROCK PERFORMER INTAKE MANIFOLD
    • 1 - CHOICE OF LONG (13113) or SHORT (12103) STEWART WATER PUMP with GASKETS
    • 1 - CHOICE OF EDELBROCK 1806 or HOLLEY 4150 CARBURETOR

Our Level 3 installation kit provides a nearly turn-key engine package for your car or truck! It doesn't get much more complete than this! We even offer you the choice of Edelbrock 1806 650-cfm Thunder AVS or Holley 4150 670-cfm Street Avenger carburetors with this kit AND the choice of a long or short Stewart brand water pump. (Please make note of your carb. choice and water pump length in the "additional comments" area during checkout.)

 

To show the potential of this affordable V8, we took one off the shelf and bolted together our K3 kit right in the warehouse, using common hand tools. We then took the completed engine to our sister store and hooked it too their dyno just to see what this combination would do. This is where things got interesting, Chevrolet Performance rates this engine at 290 HP but we thought that rating might be conservative. With that Edelbrock Performer intake, Holley carb and the rest of the K3 kit installed, (along with the dyno headers) this 350/290 Base made 333 horsepower and 371 lb.-ft. of torque. The power is all in a nice, streetable RPM range for great cruising manners with power on reserve for those special "passing" situations!

 

 



View a full list of 5.7L 350 cubic inch Small-Block Chevy V8 crate engines.

Chevrolet Performance Crate Engines include a 24-month or 50,000-mile (80,000 kilometer) limited warranty.

Click here for more detailed warranty information.