EXCLUSIVE Private Offers - Click Here!

LS376/525 (525 hp) Connect & Cruise Powertrain System with 4L70-E Automatic Transmission

Brand: Chevrolet Performance

Part Number: CPSLS3765254L70E

bar
bar
bar

$15,332.47

View Instantly Exclusive Private
and Specific Offers. Click Here



bar


AND

Connect and Cruise Rebate



FREE Shipping Always!

(Orders over $99)

LS376/525 Connect & Cruise with 4L70-E Transmission

CPSLS3765254L70E System Components:

19301360 – Engine
19354332 – Engine Control System
19299055 – Transmission
19299803 – Torque Converter
19302405 – Transmission Control System
19259117 – Transmission Installation Kit

Fuel-injected ferocity for performance cars that refuse to act their age!

What do you get when you take Chevrolet Performance’s aggressive ASA camshaft – developed for the high-rpm world of circle-track racing – and slip it into the LS3 6.2L engine? The answer is 525 horsepower! We call it the LS376 / 525, and if take-no-prisoner performance is what you’re looking for in your pro-touring Camaro or resto-mod Chevelle, this is it!
 
The ASA camshaft is a hydraulic roller with .525-inch lift on both sides, along with 226 degrees of duration on the intake side and 236 degrees on the exhaust side. Coupled with a tight, 110-degree lobe separation angle, it helps the engine deliver excellent throttle response and breathe exceptionally well at high rpm. And for durability, we complement the cam with higher-rate valve springs.
 
This high-revving powerhouse is one of our most powerful production-based crate engines. It’s backed by the tough, smooth-shifting 4L70-E automotive overdrive transmission for a great balance of power on demand and highway efficiency. The Connect & Cruise package is covered by GM's 24-month/50,000 mile warranty.
 

 

LS376/525 Connect & Cruise with 4L70-E Transmission

Engine Specs:
  • LS376 / 525 (376 cu in)
  • 525 hp @ 6,300 rpm
  • 489 lb.-ft. @ 4,400 rpm
  • 10.7:1 compression ratio

Transmission Specs:

  • 4L70-E four-speed automatic
  • Five-pinion gearsets
  • 3.06 first gear ratio, 0.70 overdrive ratio
  • 30.75 inches long (approx)

 

Need an Accessory Drive System for your LS? 

 

More about Connect & Cruise Crate Powertrain Systems

The Complete Performance Package!

When it comes to factory-engineered performance and convenience, nothing beats Chevrolet Performance's industry-exclusive Connect & Cruise powertain systems. With one package you get the engine, automatic or manual transmission, electronic controllers and al the necessary wire harnesses. Even better, we deliver it for less than the cost of buying the components separately.

Our engineers matched the engines and transmissions for optimal performance and durability, so you can wring out every horsepower with total confidence! The specially calibrated controllers are designed for retrofit installations in older vehicles, for easier and quicker installation – and more importantly – operation without the need for third-party tuning.

The Connect & Cruise lineup even includes several emissions-compliant E-ROD systems in both automatic and manual.

We did the work to design and calibrate perfectly matched powertrain systems and covered them with a 24-month / 50,000-mile limited warranty.

Chevrolet Performance pioneered the performance crate engine, so when it comes to performance innovations that save time, money and guesswork, we once again lead the way! All you have to do is install, connect, and start cruising!

NOTE: All components, engine, transmission, torque converter and controllers are ordered and delivered separately.

Connect & Cruise Builders Guide

Each Chevrolet Performance Connect & Cruise crate powertrain system includes:

  • Brand-new, fully assembled crate engine
  • Brand-new automatic or manual transmission
  • SuperMatic™ transmission control module and harness
  • Calibrated engine control module
  • Two oxygen sensors and mounting bosses (for installation in the exhaust system)
  • Mass airflow meter and mounting boss (for installation in the air intake system)
  • Throttle pedal assembly (for use with the electronically operated throttle)
  • Assembled wiring harness w/ fuse box and necessary cam and MAP sensor jumpers
  • Oil pressure sensor that is compatible with the harness
  • Instruction sheet

To facilitate a complete installation, the builder will need to source additional components to complete the engine assembly and get the vehicle running, including:

  • Fuel tank and fuel lines (re-circulating or returnless)
  • Fuel pump – 58 psi (400 kPa) for all engines except LSA, which requires 65 psi (450 kPa)
  • Air induction system that incorporates the mass airflow sensor

Additionally, all engines require a front-end accessory drive system. The instructions included with each kit lists recommendations and Chevrolet Performance offers several configurations to suit different applications. Each allows the installer to easily delete air conditioning.

Chevrolet Performance recommends the LS1 Engine Installation Guide P/N 88959384, which illustrates basic procedures and offers helpful tips on installing an LS engine into older vehicles.

LS376/525 Connect & Cruise with 4L70-E Transmission

Chevrolet Performance recommends the LS1 Engine Installation Guide P/N 88959384, which illustrates basic procedures and offers helpful tips on installing an LS engine into older vehicles.

LS376/525 Connect & Cruise with 4L70-E Transmission

Chevrolet Performance Connect & Cruise Powertrain Systems include a 24-month or 50,000-mile (80,000 kilometer) limited warranty on all components.

Click here for more detailed warranty information.