EXCLUSIVE Private Offers - Click Here!

Chevrolet Performance Ram Jet 350 Crate Engine

Brand: Chevrolet Performance

Part Number: 19355815

bar
bar
bar

$6,275.00

View Instantly Exclusive Private
and Specific Offers. Click Here



bar


AND

Holeshot Transmission Rebate



FREE Shipping Always!

(Orders over $99)

Ram Jet 350 Crate Engine

351 hp @ 5,000 rpm / 403 lb.-ft. @ 3,600 rpm

 

Vintage Style and Modern Performance

Chevrolet Performance’s unique Ram Jet 350 combines the classic look of the original Rochester "Fuelie" mechanical fuel injection system with the dependability and optimized performance of contemporary port fuel injection. It’s the perfect combination for a resto-mod hot rod.

The GM cast-iron engine block is matched with a durable rotating assembly that delivers a pump-gas-friendly 9.0:1 compression ratio, as well as a smooth hydraulic roller camshaft that complements power delivery with a great idle quality. The engine’s unique intake manifold and plenum is 9.75 inches tall, offering plenty of clearance to fit under the hood of your street rod, muscle car or truck without modifications.

The Chevy Performance Ram Jet 350 crate engine kit includes a MEFI 4 engine controller, wiring harness and a detailed instruction guide to make adding this retro-style EFI system a complete DIY project. Additional components are required, including a high-pressure fuel pump and front-end accessory drive system.

19355815 Chevrolet Crate Motor

Ram Jet 350 Tech Specs:
Part Number: 19355815
Engine Type: Chevy Small-Block V-8
Displacement (cu in): 350
Bore x Stroke (in) : 4.000 x 3.480
Block: Cast-iron with 2-bolt main caps
Crankshaft (P/N 10243068): Cast-iron
Connecting Rods (P/N 10108688): Powdered metal steel
Pistons (P/N 12571703): Hypereutectic aluminum
Camshaft Type (P/N 14097395): Hydraulic roller
Camshaft Lift (in): .460 intake / .481 exhaust
Camshaft Duration (@.050 in): 196° intake / 206° exhaust
Cylinder Heads (P/N 12528913): Vortec iron; 64cc chambers
Valve Size (in): 1.940 intake / 1.500 exhaust
Compression Ratio: 9.0:1 nominal
Rocker Arms (P/N 12367346): Aluminum roller style
Rocker Arm Ratio: 1.6
Recommended Fuel: 92 octane
Ignition Timing: Base 10° BTDC, 32° Total
Maximum Recommended rpm: 5,500
Balanced: External

 Click here for more detailed information about the Ram Jet 350 from Chevrolet Performance.

Recommended Transmission:  Hydra-Matic 4L65-E Four-Speed Automatic P/N 19260380 or the T56 Super Magnum 6-Speed Manual Transmission P/N 13929795 (for a complete Powertrain System feturing the Ram Jet 350 and T56, see the Connect & Cruise Ram Jet 350 kit.

 

Installation Notes:
• Comes with externally balanced, manual transmission flywheel; change to externally balanced flexplate for automatic transmission applications.
• Installer to supply 12-volt power source and fuel
• Designed for pre-1976 street vehicles or any off-road vehicle
• Not intended for marine applications
IMPORTANT! For a safe, proper and trouble-free engine break-in, the MEFI 4 computer has a “green” mode that controls rpm during the break-in period. During this period, engine speed is limited to 4,000 rpm in the first hour, 4,500 rpm in the second hour and 5,500 rpm in the third hour.

Note: Distributor with melonized steel gear MUST be used with long blocks and partial engines with steel camshafts, or engine damage will occur.

 

 

Supersedes old GM P/N 12499120

Chevrolet Performance Crate Engines include a 24-month or 50,000-mile (80,000 kilometer) limited warranty.

Click here for more detailed warranty information.