ZZ6 Turn-Key Chevrolet Performance Crate Engine
A ZZ6 That Is Ready To Run!
The ZZ6 delivers more power than any 350 Small-Block ever installed in a GM production vehicle. Rated at 405 hp and 406 lb.-ft. of torque, it features lightweight aluminum cylinder heads that enable optimal airflow at high rpm. The cylinder head casting is based on the proven Fast Burn design, with large intake runners and 2.00/1.55-inch valves. Beehive-style valve springs deliver greater high-rpm performance and durability. The ZZ6 also features an aggressive hydraulic roller camshaft.
This Turn-Key engine package includes the intake, distributor and balancer installed. The carburetor, starter, fuel pump, air conditioning pump, alternator, single belt front-end accessory drive kit and more are also included.
ZZ6 Turn Key Crate Engine
405hp @ 5,600 rpm/406 lb.-ft. @ 4,600 rpm
The Ultimate ‘ZZ’ 350-Based Crate Engine from Chevrolet Performance!
The all-new Chevrolet Performance ZZ6 crate engine is one of the most powerful 350 based crate motors in the more than 25-year history of the ‘ZZ’ crate engine lineup. It uses aluminum Fast Burn cylinder heads equipped with LS-style beehive valve springs for greater high-rpm performance. It’s rated at 405 hp and 406 lb.-ft. of torque - more than any Small Block engine ever offered in a production Chevy muscle car or Corvette!
The ZZ6 350 is built with a cast-iron block with four-bolt mains, along with a forged steel crankshaft, an aggressive hydraulic roller camshaft and durable, high-silicon pistons. All-new, motorsports-inspired valve covers distinguish this new crate motor at a glance, too – along with Chevy “Bowtie” insignias in the ends of the cylinder heads that let everyone know you’ve got the latest GM Performance hardware under the hood.
This Turn Key engine package includes the distributor, and balancer installed. The carburetor, starter, fuel pump, air conditioning pump, alternator, single belt front-end accessory drive kit and more are also included. Chevrolet Performance also offers the ZZ6 350 base engine (P/N 19351532) at a lower price, allowing you to finish the engine yourself.
ZZ6 350 Tech Specs:
Part Number: 19351533
Engine Type: Chevy Small Block
Bore x Stroke (in.): 4.000 x 3.48
Block (P/N 10105123): Cast-iron with 4-bolt Mains
Crankshaft – (P/N 12556307): Forged steel
Connecting Rods (p/n 10108688): Forged powder metal
Pistons (P/N 10159436): Hypereutectic aluminum
Intake Manifold (P/N 12496822): Single-plane aluminum
Carburetor (P/N 19170093): 770 cfm Holley
Camshaft (P/N 10185071): Steel hydraulic roller
Valve Lift (in): .474 intake/.510 exhaust
Camshaft Duration (@.050 in): 208° intake/221° exhaust
Cylinder Heads (p/n 19300955): Fast Burn aluminum; 62cc chambers
Valve Size (inches): 2.000 intake / 1.550 exhaust
Compression Ratio: 9.72:1 nominal
Rocker Arms (p/n 19210724): Aluminum roller style
Rocker Arm Ratio: 1.5:1
Recommended Fuel: Premium pump
Distributor (P/N 93440806): HEI
Ignition timing: 36º Total @ 4,000 rpm
Maximum Recommended RPM: 5,800 rpm
• Comes with 12.750" externally balanced 153-tooth automatic transmission flexplate. Change to externally balanced flywheel for manual transmission applications.
• Requires fuel line from fuel pump to carburetor
• Designed for pre-1976 street vehicles or any off-road vehicle.
• Some assembly and minor engine tuning required
• Not intended for marine application
Note: Distributor with melonized steel gear MUST be used with long-blocks and Partial engines with steel camshafts, or engine damage will occur.
This Chevrolet Performance Crate Engine includes a 24-Month or 50,000-Mile/80,000-Kilometer Limited Warranty
Chevrolet Performance Crate Engines include a 24-month or 50,000-mile (80,000 kilometer) limited warranty.
You save $58.61
You save $679.69